Filter
Top Products
15
Recording
Recording
Using the Digital Limiter and Digital Equalizer
To make recordings using the limiter and equalizer
effects, set the “SBM/LIMITER/EQ” control to
“LIMITER + EQ” or “SBM + LIMITER + EQ”. Make
detailed settings for each item using the Setup menu.
For details, refer to page 28, “Setup Menu Operations”.
Digital Equalizer Setting
The CD recorder is equipped with a 3-band digital
equalizer, a shelving equalizer for bass and trable
frequency bands, and a parametric equalizer for
middle frequency band. Adjust the parameters to make
detailed settings using the Setup menu. For details,
refer to page 28, “Setup Menu Operations”.
Parameters and Variable Ranges
Bass frequency: 50 Hz to 1 kHz
Bass level: – 6.0 dB to 6.0 dB
Mid frequency: 100 Hz to 10 kHz
Mid level: – 6.0 dB to 6.0 dB
Mid width: Narrow/Mid/Wide
Treble frequency: 1 kHz to 12.5 kHz
Treble level: – 6.0 dB to 6.0 dB
z
Setting the band level parameter to high on the + side
may cause the signal level to rise to the clip level
internally, resulting in the sound warping. If this occurs,
lower the input level using the REC LEVEL control knob.
SBM/LIMITER/EQ
OFF
SBM
LIMITER
+
EQ
SBM
+
LIMITER
+
EQ
Treble equalizer
Frequency = 1 kHz, 12.5 kHz when each level = ±6 dB.
Mid equalizer
Frequency = 1 kHz and level = ±6 dB when width is
changed to 3 levels.
Equalizer Frequency Characteristics
Bass equalizer
Frequency = 50 Hz, 1 kHz when each level = ±6 dB.
Mid equalizer
Frequency = 100 Hz, 1 kHz, 10 kHz when each level =
±6 dB.