Sony BDV-EF1100 Home Theater System User Manual


 
57
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\100ADD.fm
masterpage: Right
Additional Information
The system cannot connect to the
network.
t Check the network connection
(page 18) and the network settings
(page 48).
You cannot connect your PC to the
Internet after [Wi-Fi Protected Setup
(WPS)] is performed.
t The wireless settings of the router may
change automatically if you use the
Wi-Fi Protected Setup function before
adjusting the settings of the router. In
this case, change the wireless settings
of your PC accordingly.
The system cannot connect to the
network or the network connection is
unstable.
t Check if the wireless LAN router is on.
t Check the network connection
(page 18) and the network settings
(page 48).
t Depending on the usage environment,
including the wall material, radio wave
reception conditions, or obstacles
between the system and the wireless
LAN router, the possible
communication distance may be
shortened. Move the system and the
wireless LAN router closer to each
other.
t Devices that use a 2.4 GHz frequency
band, such as a microwave, Bluetooth,
or digital cordless device, may
interrupt communication. Move the
unit away from such devices, or turn
off such devices.
t The wireless LAN connection may be
unstable depending on the usage
environment, especially while using
the Bluetooth function of the system.
In this case, adjust the usage
environment.
The wireless router you want is not
shown in the wireless network list.
t Press RETURN to return to the
previous screen, and try [Wireless
Setup(built-in)] again. If the wireless
router you want is still not detected,
select [Add a new address.] from the
network list, then select [Manual
Registration] to input a network name
(SSID) manually.
Pairing cannot be done.
t Move the Bluetooth device closer to
the unit.
t Pairing may not be possible if other
Bluetooth devices are present around
the unit. In this case, turn off the other
Bluetooth devices.
t Delete the system from your Bluetooth
device and perform pairing again
(page 26).
Connecting cannot be done.
t The pairing registration information
has been erased. Perform the pairing
operation again (page 26).
Network connection
Wireless LAN
connection
Bluetooth device