Filter
Top Products
46
GB
BDV-EF1100
4-446-737-11(1)
D:\NORM'S JOB\SONY HA\SO120045\BDV-EF1100\4446737111_GB
(CEK)\090SET.fm
masterpage: Left
x [Audio Output]
You can select the output method where the
audio signal is output.
[Speaker]: Outputs multi-channel sound
from the system’s speakers only.
[Speaker + HDMI]
: Outputs multi-channel
sound from the system’s speakers and
2-channel linear PCM signals from the
HDMI (OUT) jack.
[HDMI]: Outputs sound from the HDMI
(OUT) jack only. Sound format depends on
the connected equipment.
• When [Control for HDMI] is set to [On]
(page 47), [Audio Output] is set to [Speaker +
HDMI] automatically and this setting cannot be
changed.
• When [Audio Output] is set to [HDMI], the
output signal format for the “TV” function is
2-channel linear PCM.
x [Sound Effect]
You can turn on or off the system’s sound
effects (SOUND MODE setting
(page 21)).
[Sound Mode On]
: Enables the surround
effect of the sound mode
(page 21) and
Football mode (page 22).
[2ch Stereo]: This system outputs the sound
from the front left/right speakers and
subwoofer only. Multi-channel surround
formats are downmixed to 2-channel.
[Off]: The sound effects are disabled. You
can hear sound as it is recorded.
x [Speaker Settings]
To obtain optimum surround sound, set the
speakers. For details, see “Setting the
Speakers” (page 38).
x [Bluetooth AUDIO - AAC]
You can enable and disable AAC audio.
[On]: AAC audio if the Bluetooth device
supports AAC.
[Off]
: SBC audio.
You can enjoy high quality sound if the AAC is
enabled. In case you cannot listen to AAC sound
from your device, select [Off].
[BD/DVD Viewing
Settings]
x [BD/DVD Menu Language]
You can select the default menu language
for BD-ROMs or DVD VIDEOs.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language
by referring to “Language Code List”
(page 63).
x [Audio Language]
You can select the default track language
for BD-ROMs or DVD VIDEOs.
When you select [Original], the language
given priority in the disc is selected.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language
by referring to “Language Code List”
(page 63).
Note
Note