Filter
Top Products
43
GB
Others
MHC-GT111
• Front speaker (European model only)
(SS-GT111M)
Front speaker (Asian model only)
(SS-GT111S)
Front speaker (Other models)
(SS-GT111)
Speaker system: 2-way, 2-unit, bass
reflex
Speaker unit:
Woofer: 160 mm, cone type
Tweeter: 40 mm, horn type
Rated impedance: 6 ohms
Dimensions (w/h/d) (Approx.):
216 × 361 × 208 mm
Mass (Approx.): 2.7 kg per speaker
LBT-ZT4
• Front speaker (SS-ZT4)
Speaker system: 3-way, 3-unit, bass
reflex
Speaker unit:
Subwoofer: 5 inch (130 mm), cone
type
Woofer: 5 inch (130 mm), cone type
Tweeter: 1 1/2 inch (40 mm), horn type
Rated impedance: 6 ohms
Dimensions (w/h/d) (Approx.):
9 3/8 × 14 1/4 × 9 3/8 inch (238 ×
361 × 238 mm)
Mass (Approx.): 8 lb 10 oz (3.9 kg) per
speaker
• Subwoofer (SS-WG4)
Speaker system: 1-unit, bass reflex
Speaker unit:
Woofer: 8 inch (200 mm), cone type
Rated impedance: 6 ohms
Dimensions (w/h/d) (Approx.):
10 1/2 × 14 1/4 × 12 5/8 inch (266 ×
361 × 320 mm)
Mass (Approx.): 13 lb 15 oz (6.3 kg)
General
Power requirements
North American model: AC 120 V,
60 Hz
European and Russian models:
AC 230 V, 50/60 Hz
Oceanian model: AC 230 – 240 V,
50/60 Hz
Mexican model: AC 127 V, 60 Hz
Argentine model: AC 220 V, 50/60 Hz
Other models: AC 120, 220 or 230 –
240 V, 50/60 Hz, Adjustable with
voltage selector
Power consumption
MHC-GT555: 216 W
MHC-GT444: 286 W
MHC-GT222: 163 W
MHC-GT111 (Brazilian model):
185 W
MHC-GT111 (Other models): 150 W
LBT-ZT4 (American model): 225 W
LBT-ZT4 (Canadian model): 285 VA
Dimensions (w/h/d) (excl. speakers)
Approx. 231 × 361 × 437.5 mm
(9 1/8 × 14 1/4 × 17 1/4 inch)
Mass (excl. speakers)
HCD-GT555/GT444/GT222,
HCD-ZT4: 10.0 kg (22 lb 1 oz)
HCD-GT222 (European model):
9.6 kg
HCD-GT111: 8.0 kg
Supplied accessories:
Remote Commander (1), R6 (Size AA)
batteries (2), AM loop antenna (1), FM lead
antenna (1), Speaker pads MHC-GT555/
MHC-GT444/LBT-ZT4 (12), MHC-GT222/
MHC-GT111 (8), TDM-iP10 (M)
(LBT-ZT4 only) (1)
Design and specifications are subject to
change without notice.
• Standby power
consumption: 0.5 W
• Halogenated flame
retardants are not used in the
certain printed wiring
boards.