Filter
Top Products
25
GB
Basic Operations
Adjusting the sound
Use the controls on the unit for this
operation.
To add a sound effect
* The volume switches to power mode and the
equalizer curve changes.
**“BOOSTER” lights up in the display when
the MP3 BOOSTER+ effect is activated.
To turn on the subwoofer
(MHC-GT555, MHC-GT444 and
LBT-ZT4 only)
Press SUBWOOFER repeatedly until the
SUBWOOFER indicator on the unit lights
up. If you later disconnect the subwoofer,
repeat the procedure until the
SUBWOOFER indicator on the unit lights
off. The volume of the subwoofer is
linked to the front speakers.
Changing the display
Use the controls on the unit for this
operation.
1 Press OPTIONS.
2 Turn OPERATION DIAL to select
the item you want.
ILLUM
Change the power illuminator pattern
around MASTER VOLUME.
M-BACKLIGHT (Meter backlight)
Change the Meter Backlight pattern.
MTR POINTER (Meter pointer)
Change the Meter Pointer pattern.
DISPLAY (Front panel display)
Change the front panel display pattern.
3 Press ENTER.
4 Turn OPERATION DIAL to select
the setting you want, then press
ENTER.
5 Repeat steps 2 through 4 to
make other settings.
To exit the OPTIONS menu
Press OPTIONS again.
To return to the previous display
Press RETURN.
To Press
Reinforce the
bass and create
a more powerful
sound
GROOVE repeatedly
until “GROOVE”* or
“Z-GROOVE”* lights up
in the display.
Select the
surround effect
SURROUND repeatedly
until “SURROUND”
lights up in the display.
Select a preset
sound effect
PRESET EQ (or EQ on
the remote) repeatedly. To
cancel, press PRESET EQ
(or EQ on the remote)
repeatedly until “FLAT”
appears.
Enhance the
sound quality of
the audio file
OPTIONS and turn
OPERATION DIAL to
select “MP3
BOOSTER+”, then press
ENTER. Turn
OPERATION DIAL to
select “AUTO”, then press
ENTER.**