Filter
Top Products
31
GB
Other Operations
Using the Timers
The system offers three timer functions.
You cannot activate both the Play Timer
and the Recording Timer at the same time.
If you use either with the Sleep Timer, the
Sleep Timer has priority.
You can fall asleep to music. This
function works even if the clock is not set.
Press SLEEP repeatedly.
If you select “AUTO”, the system
automatically turns off
– after the disc stops or after 100 minutes
in CD function.
– after the USB device stops or after 100
minutes in USB function.
– after 100 minutes in other functions.
Do not select “AUTO” during CD-TAPE
Synchro Recording, CD-USB
Synchronized Transfer, or during the
erase operation.
Tip
The system will not turn off automatically at the
preset time when you
– perform the erase operation in USB function.
– play a tape.
– record onto a tape.
Make sure you have set the clock.
Play Timer:
You can wake up to disc, tuner or optional
USB device at a preset time.
Recording Timer:
You can transfer music from a preset radio
station into an USB device at a specified
time.
1 Prepare the sound source.
Play Timer
Prepare the sound source, and then
press VOLUME +/– to adjust the
volume.
To start from a specific track or file,
create your own program (page 27).
Recording Timer
Tune in the preset radio station
(page 28).
2 Press CLOCK/TIMER SET
(RM-AMU006) or TIMER MENU
(RM-AMU008).
3 Press ./> (RM-AMU006)
or
v/V (RM-AMU008) repeatedly
to select “PLAY SET” or
“REC SET”, and then press
ENTER (RM-AMU006) or
(RM-AMU008).
“ON” appears, and the hour indication
flashes.
4 Set the time to start playing or
recording.
Press ./> (RM-AMU006)
or
v/V (RM-AMU008) repeatedly
to set the hour, and then press
ENTER (RM-AMU006) or
(RM-AMU008). The minute
indication flashes. Use the procedure
above to set the minutes.
5 Use the same procedure as in
step 4 to set the time to stop
playing or recording.
Sleep Timer
Play Timer/Recording Timer
Continued
l