Filter
Top Products
28
GB
Presetting radio
stations
You can preset your favorite radio
stations and tune them in instantly by
selecting the corresponding preset
number.
Use the buttons on the remote for this
operation.
1 Tune in the station you want
(see “Listening to the radio”
(page 17)).
2 Press TUNER MEMORY.
3 Press +/– repeatedly to select
the preset number you want.
If another station is already assigned to
the selected preset number, the station
is replaced by the new station.
4 Press ENTER.
5 Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM and 10
AM stations.
6 To call up a preset radio station,
press TUNING MODE repeatedly
until “PRESET” lights up in the
display, and then press +/–
repeatedly to select the preset
number you want.
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data System?
Radio Data System (RDS) is a
broadcasting service that allows radio
stations to send additional information
along with the regular program signal.
This tuner offers convenient RDS features
such as station name. RDS is available
only on FM stations.*
Note
RDS may not work properly if the station you
are tuned in is not transmitting the RDS signal
properly or if the signal is weak.
* Not all FM stations provide RDS service, nor
do they provide the same type of services. If
you are not familiar with the RDS system,
check with your local radio stations for details
on RDS services in your area.
Receiving RDS broadcasts
Simply select a station from the FM
band.
When you tune in a station that provides
RDS services, the station name appears in
the display.
To check the RDS information
While receiving an RDS station,
press DISPLAY repeatedly.
RDS information appears on the display.
GROOVE
GROOVE
AUTO
AUTO
TUNED
TUNED
MHz
MHz
1
ST
ST
2 3
REC
Preset number