Filter
Top Products
Product Guide
2
Adding the SUB to your Sonos System
You can easily add the SONOS SUB to an existing Sonos system.
• You can associate the SUB with any amplified Sonos player, including a CONNECT:AMP (ZP120), PLAY:3, PLAY:5, or
ZP100. You cannot associate it with an un-amplified Sonos player such as the CONNECT (ZP90) or ZP80.
• The SUB is compatible with Sonos software versions 3.8 and later. Be sure to check for software updates before add-
ing the SUB to your Sonos system.
1.
Carefully unpack the package contents.
2.
Choose a location for the SUB. It is designed to provide optimal sound wherever you place it.
• You can position the SUB either vertically or horizontally. If you are going to use the SUB horizontally on a smooth floor,
you can attach the 4 permanent felt feet (included with your SUB) to each of the corners. See "Attaching the feet for
horizontal placement" on page 4 for more information.
• The SUB is designed to be located on the floor. You can place it in a corner, against the wall, behind, under, or next to
any piece of furniture on any kind of floor surface.
3.
Attach the power adapter and plug in the SUB. Be sure to push the power cord firmly into the SUB until it is flush with the
surface.
Caution: Subwoofers are heavy. Exercise caution when unpacking your SONOS SUB. Use the
acoustic slot as a handle to lift the SUB out of the box. (You should always bend your knees
when lifting heavy objects to avoid undue stress on your back.)
Note: The SUB contains strong magnets. Don’t place the SUB near equipment that is
sensitive to magnetic fields.
Make sure at least one side of the rectangular
opening (acoustic slot) is unobstructed.
• If you place the SUB vertically flush against
a wall, do not block the front acoustic slot.
• If you place the SUB horizontally on the
floor, don’t put anything on top of it. Leave
at least 1" clearance along the top of the
SUB if placing under furniture.