Filter
Top Products
128-7193A
23 of 32
-23-
Time Zone:
The Time Zone option provides:
(GMT-9:00) Alaska
(GMT-8:00) Pacific
(GMT-7:00) Mountain
(GMT-6:00) Central
(GMT-5:00) Eastern
(GMT-4:00) Atlantic
(GMT-3:30) Newfoundland (Abbreviated as
GMT-3:30 Newfndlnd)
Use the Encoder knob to highlight the desired
time zone and press the Select Button.
Daylight Savings Time (DST) Observance:
Activate this function if your area is subject to DST;
rotate the Encoder knob to toggle between DST
Observed (default) or DST Not Observed.
NOTE: When the shuttle has not been turned on
or has been removed from the docking
port for any length of time be sure to
position the antenna to receive the
satellite signal so the time can be
automatically updated. If the time
Alarm Clock:
When this menu option is highlighted and selected,
you will be able to set the unit to turn on at a specific
time. The last selected channel prior to shutdown
will be present when the Alarm feature is activated.
Additionally, a series of beep tones will be heard.
Press any button on the front panel to silence the
alarm tones. The alarm will trigger again at the set
time unless the Alarm Off feature is selected under
the Set Alarm function.
Set Alarm (Default-Off)
Use the Encoder knob to toggle between Alarm
On or Alarm Off and press the Select Button
for desired alarm status. When the alarm is on
the time will be displayed on the default screen in
reverse image.
information has been lost, the shuttle will
not display the time information and
preprogrammed alarms will not be
triggered until the shuttle updates the
time information using the satellite
signal.