Filter
Top Products
128-7193A
16 of 32
display appears for 2 seconds, as shown previ-
ously, providing directions to set the JumpSet chan-
nel, before returning to the “Choose Jump Setting”
screen.
Once the Jump button is set to function as JumpSet,
the Traffic line displays “NONE” to signify that the
button can no longer be set to traffic alert.
Initial Activation
When the Jump Button is pressed for the very first
time, a pop-up shall appear indicating “Set Jump
Button” for 2 seconds, before taking the user to
the following “Jump Setting” screen of Menu
-16-
2 sec.
Options. Then follow the previous steps describ-
ing city selection.
Tuning and Alert
While listening to any Sirius programming, a
press and release of the Jump button, or a press
and hold of the Jump Button activates the Jump
function. If this is the first time the Jump button is
activated, refer to Initial Activation. Otherwise, the
receiver will recognize whether the Jump button has
been set to city traffic report or simply as a JumpSet
button. The tuning and alert mechanism only works
in the normal operation mode, and not in Channel
List Mode, Category List Mode, Preset Tuning
Mode or Menu Option Mode.
Traffic/City Market
If the receiver determines that the Jump button is
set to Traffic (City Market), it
then detects whether a City
ID has been set. If the City
ID is not present (not set
inadvertently), the adjacent
screen appears indicating the Button was not set.
2 sec.