Filter
Top Products
128-7193A
18 of 32
Display Settings
The following adjustments are possible:
Contrast Control
Dimming Control
Font Type
To enter any of these modes, use the
Encoder
knob to highlight the option you wish to adjust and
press the Encoder knob. Upon entering either the
contrast or dimming control, a 10 segment horizon
tal bar graph is displayed with a “-” sign to the left
and a “+” sign to the right. The current setting is
indicated on the bar graph. Rotating the Encoder
knob adjusts the bar graph indication and function
accordingly.
of the Jump button saves the current channel as
the JumpSet channel. When a channel is saved
as a JumpSet, the band indicator will change to
to indicate that the current channel is associ-
ated with the Jump button.
If the receiver determines that the Jump button
Setting is a JumpSet, before a JumpSet channel
is chosen, pressing and releasing the Jump
button yields a pop-up screen indicating “Button
Not Set”.
If the channel is set, pressing and releasing the
Jump button tunes the receiver to the JumpSet chan-
nel immediately. If that channel is the current chan-
nel, the receiver tunes to the previous channel. If no
previous channel is available, e.g. first channel
tuned to after a power cycle, there will be an au-
dible beep and the receiver remains tuned to the
current channel.
Replace
The traffic city ID can only be replaced by changing it
in the Menu Option - Jump Setting - Choose Traffic
Market. The JumpSet channel can be replaced by
programming another channel as the JumpSet
channel.
-18-