Filter
Top Products
128-7193A
20 of 32
-20-
Once a channel has been highlighted, pressing the En-
coder knob displays the text “Lock” next to the channel
and prevents the channel from being accessible during
any of the tuning modes. Locked channels can be ac-
cessed only by direct channel number entry, at which
time the user will be prompted to enter the previously
stored 4-digit code. Once the correct code has been
entered, the audio begins to play. The channel returns to
the locked status if the channel is changed or the ve-
hicle/unit is turned off (or by returning to this menu and
going through the same process to return the channel
to the list). Upon adding a channel, the text “Lock” is
removed from alongside the channel number/name.
Lock/Unlock Default Code Function
The first time the Lock/Unlock function is accessed,
the user must enter the default lock code. The default
lock code is “0000”. This code can be maintained or
changed. To change the default lock code perform the
following procedure:
Add or Skip
Upon entering this mode, a channel list is displayed with the
current channel in play highlighted. Rotate the Encoder knob
to navigate the list and highlight the channel to be adjusted.
Once a channel has been highlighted, pressing the Select
Button displays the text “Skip” next to the channel, and pre-
vents the channel from being accessible during any of the
tuning modes. Skipped streams can only be accessed either
through direct channel number entry or by returning to this
menu and going through the same process to return the
skipped channel to the list. Upon adding a channel, the text
“Skip” is removed from alongside the channel number/ name.
Lock Options
Upon entering this mode for the first time, the user is
prompted to enter a four digit numerical code that is
used to lock/unlock channel access. All future entries
into this mode displays a channel list with the current
channel in play highlighted. The Encoder knob is used
to navigate the list and highlight the channel to be ad-
justed.