Filter
Top Products
SC-FM1 User Guide
31
Display Control Unit does not
turn on
Display Control Unit displays
“ANTENNA NOT DETECTED”
Audio static or loss of clarity
Display Control Unit displays
“ACQUIRING SIGNAL”
No sound
Blown fuse, or the power cable is not properly connected. Check for
a bad fuse and check power cable connection.
The satellite antenna is not connected to the S
C-FM1 Tuner. Check
satellite antenna connection to the Tuner.
FM frequency contains static. Locate a quiet FM frequency on your
vehicle radio and set the SC-FM1 Tuner’s FM frequency to match.
The vehicle antenna is not connected to radio. Check vehicle
antenna cable to be sure it is connected.
Check for obstacles over or around satellite antenna. Change
vehicle location to eliminate nearby obstacles (bridges, overpasses,
etc.)
The audio cables are not connected, or the FM radio is set to the
wrong frequency. Check the audio cables at the SC-FM1 Tuner and
the vehicle radio. Tune the vehicle FM radio to the same FM
frequency the SC-FM1 Tuner is set to.
Problem Cause and Suggested Solution
Troubleshooting
This section lists several common problems and suggested solutions. If, after trying the suggested solutions
listed here, you are still unable to resolve the problem you’re having with your
SC-FM1 Tuner and Display
Control Unit, contact your installer, dealer, or retailer for more help.