Filter
Top Products
SC-FM1 User Guide
21
menu, press the MENU button.
Auto Select
Auto Select chooses whether the Display Control
Unit immediately tunes to a channel when the
channel is highlighted or whether you must first
press the SELECT button in order to tune to a
highlighted channel in any of the list modes. Turn
Auto Select ON if you would like to automatically
tune to the highlighted channel without pressing
the SELECT button. This will allow you to quickly
listen to all the available programming on a given
list. The default setting for Auto Select is OFF. To
change the Auto Select option:
1. From the menu list, use the + and – buttons to
highlight “Auto Select”. Press the SELECT
button.
2. Use the + and – buttons to highlight “ON” or
“OFF”. Press the SELECT button to select the
chosen option.
To exit the Auto Select menu, push the MENU
button.
Signal Indicator
The signal indicator menu displays the strength of
the SIRIUS signal from the satellite antenna and
also from terrestrial (ground) transmitters. To
display the SIRIUS signal strength:
1. Use the + and – buttons to highlight “Signal
Indicator”. Press the SELECT button.
2. Two 10 segment horizontal bar graphs will be
displayed ( SAT and TER) with a “-” sign to the
left and a “+” sign to the right. SAT indicates
satellite signal strength and TER indicates
terrestrial signal strength - if available.
To exit the Signal Indicator menu, press the
MENU button.
_
+
SAT
TER
Signal Indicator
Confirmation Tone
The Display Control Unit will sound an audio tone
alert when the unit powers ON and OFF as well
as when the S-Seek Alert is activated. The default