Filter
Top Products
SPK SET
AUTO SET
CONFIG
DISTANCE
X-OVER
R-EQ : OFF / ON
RETURN
F : 80 Hz / 40~200
C : 80 Hz / 40~200
S : 80 Hz / 40~200
SB : 80 Hz / 40~200
RETURN
FL : 10.0 FT / 0~30
C : 10.0 FT / 0~30
FR : 10.0 FT / 0~30
SR : 5.0 FT / 0~30
BR : 5.0 FT / 0~30
BL : 5.0 FT / 0~30
SL : 5.0 FT / 0~30
RETURN
FL : 3.0 M / 0.1~9.0
C : 3.0 M / 0.1~9.0
FR : 3.0 M / 0.1~9.0
SR : 1.5 M / 0.1~9.0
BR : 1.5 M / 0.1~9.0
BL : 1.5 M / 0.1~9.0
SL : 1.5 M / 0.1~9.0
RETURN
FRONT : L / S
CENTER: L / S / N
SURR : L / S / N
SURR-B : L 2c / L 1c / S 2c / S 1c / N
SUB-W : Y / N
RETURN
UNIT : FT / M
41
SETTING THE SPEAKER SETUP
• After you have installed this receiver and connected all the components, you should adjust the speaker settings for the
optimum sound acoustics according to your environment and speaker layout.
• Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the
speaker settings, too.
• When performing the AUTO SETUP procedure, you need not perform the SPEAKER CONFIGURATION, SPEAKER
DISTANCE, SPEAKER CROSSOVER and CH LEVEL setup procedures.
• AUTO SET (AUTO SETUP) : To set the speaker setup and channel level setup automatically.
• CONFIG (SPEAKER CONFIGURATION) : To select the sizes of the speakers that are connected.
• DISTANCE (SPEAKER DISTANCE) : To enter the distance between the listening position and each speaker to set the delay time
automatically for optimum surround playback.
• X-OVER (SPEAKER CROSSOVER) : To select the desired crossover frequency.
• R-EQ (ROOM EQ) : To turn on or off the room EQ.
• RETURN : To return to the previous menu.
When selecting the AUTO SETUP
• Auto Setup lets you avoid troublesome listening-based speaker setup and achieve good surround sound. Auto Setup has the
feature that provides the optimum listening environment at two main listening positions in your room, where there are often
multiple listeners viewing programs together.
You should connect the supplied microphone to the SETUP MIC jack so that this receiver can analyze the information from a
series of test tones emitted from speakers at two main listening positions and can adjust the size, distance, sound level,
crossover frequency and frequency response of each speaker automatically.
For optimum effectiveness, move the microphone from first position to second position within the listening area surrounded by
the speakers while performing the auto setup.
ENGLISH