Filter
Top Products
Useful Features
-51
Before Using the 3D Glasses
Before using the 3D Glasses for the fi rst time,
remove the insulating sheet attached to them.
Replacing the Button Cell
Battery
The battery has an expected service life of ap-
proximately 75 hours.
• When the battery power is low, the LED light
blinks six times after the power is turned on.
• When replacing the button cell, use only the
designated battery type (Maxell branded
CR2032 lithium button battery).
1
Loosen the screw used to secure
the battery cover, and then remove
the battery cover.
2
1
1
2
Remove the button cell battery.
1Place the tip of the slotted precision screw-
driver into the opening between the button
cell and the socket.
2Lift up the button cell while taking care not
to get the screwdriver caught on the metal
latch.
2
1
3
When the battery comes loose from
the socket, pick it out with your
fi ngers.
4
Hook a new button cell to the metal
latch and insert it into the socket.
Take care not to reverse the battery polarity
(+ and -) when inserting the button cell.
5
Close the battery cover.
6
Insert the screw to secure the bat-
tery cover.
Note
• Used batteries should be disposed in accor-
dance with local laws and regulations.
•
2
3
4
5
6