Filter
Top Products
E-7
Listening to a CD or MP3/WMA disc
Disc playback
Press the ON/STAND-BY button to turn the power on. 1
Press the CD button on the remote control or FUNCTION button 2
repeatedly on the main unit to select CD function.
Press the OPEN/CLOSE button to open the disc tray.
3
Place the disc on the disc tray, label side up.4
Press the OPEN/CLOSE button to close the disc tray. 5
Press the 6
(CD/USB
) button to start playback. After the last
track is played, the unit will stop automatically.
Notes for CD or MP3/WMA disc:
When the end of the last track is reached during fast forward, “END”
will appear on the display and CD operation will be paused. When the
beginning of the fi rst track is reached during fast reverse, the unit will
enter the playback mode (only for CD).
Rewritable multi-session discs with unfi nished writing, can still be
played.
Listening to the iPod, iPhone or iPad
(continued)
Function
Main unit Remote control
Operation
Dock/USB
Dock USB
Track up/
down
Press in the playback
or pause mode. If you
press the button in the
pause mode, press the
button to start the
desired track.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
Display/
Toggle
information
display
____
iPod
CD/USB
Press for more than
2 seconds to toggle
the video out display
between iPod or TV.
Repeat ____
Press to toggle repeat
mode.
Shuffl e ____
Press to toggle shuffl e
mode.
Menu ____ iPod
iPod
Press to view the iPod
menu during iPod
function.
Enter ____
Press to confi rm the
selection.
Cursor
Up/Down
____
Press to select the iPod
menu.
Navigating the iPod, iPhone or iPad menus
Press the MENU button to view the menu on iPod, iPhone or iPad 1
unit. Press it again to go back to previous menu.
Use the PRESET ( 2 or ) button to select an item on the menu
and then press ENTER button.
Note:
When navigating the iPod, iPhone or iPad menu with remote control, do
not operate any of the buttons on the iPod or iPhone unit. The volume
level is adjusted by pressing the VOL (+ or -) button on the main unit or
the remote control. Adjusting the volume on the iPod, iPhone or iPad
units give no effect.
iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod, iPhone
and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units will
automatically power on when docked or connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked iPod, iPhone
or connected iPad unit will automatically turn to stand-by mode.
Watching videos on a TV connected to iPod
or iPhone
Press the DISPLAY (TV OUT) button for more than 2 seconds until 1
“TV OUT ON” appear on display.
Press the ENTER button to start playback.
2
Notes:
If the TV Out setting is already turned on at video menu, the video
is automatically displayed on the TV screen when ENTER key is
pressed.
TV out display is not support through USB terminal. (iPad)
To return to watching video on iPod or iPhone screen, press the
MENU button to enter video menu. Then press the DISPLAY (TV
OUT) button for more than 2 seconds until “TV OUT OFF” appears.
During iPod or iPhone video playback, pressing the DISPLAY (TV
OUT) button will not toggle video out display between iPod and TV.
Caution:
Unplug all accessories for the iPod or iPhone before inserting it into
the docking station.
Stop button
( ) at main unit is invalid during iPod function.
Various iPod, iPhone and iPad functions
Function
Main unit Remote control
Operation
Dock/USB
Dock USB
Play
iPod CD/USB
Press in the pause mode.
Pause iPod CD/USB
Press in the playback
mode.
To disconnect iPod, iPhone or iPad
Simply remove the iPod or iPhone from the docking station or iPad
connector from USB terminal. It is safe to do so even during playback.
XL-HF201P_HF301P_US.indd 7XL-HF201P_HF301P_US.indd 7 3/7/2012 10:35:23 AM3/7/2012 10:35:23 AM