Filter
Top Products
E-6
To remove adaptor for iPod or iPhone
Insert the tip of a screwdriver (“-” type, small)
into the adaptor hole as shown and lift upward
to remove.
iPod or iPhone playback
Press the ON/STAND-BY button to turn the power on.1
Press the iPod or iPhone button on the remote control or 2 FUNCTION
button repeatedly on the main unit to select iPod function.
Insert iPod or iPhone unit into the dock of main unit. “DOCK OK” 3
will appear.
Press the 4 (iPod or iPhone ) button to start playback.
iPhone playback
Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately 10 seconds.
Incoming calls will pause the playback.
Once the calls are answered, the conversation can only be heard
through the built-in iPhone speaker. Turn on the iPhone speaker or
undock the iPhone to start conversation.
Caution:
Unplug all accessories from the iPod or iPhone before inserting it into
the dock.
Listening to the iPod, iPhone or iPad
(continued)
iPod, iPhone and iPad connection (USB only)
The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
This product is made for iPod, iPhone and iPad. To
prevent random interference when iPod, iPhone
and iPad is connected, the headphone output is
disabled, and “HP INVALID” will be displayed.
You may also experience brief audio interference during
incoming calls.
Insert the connector to the 1
iPod, iPhone or iPad.
iPad
Connector
Place the iPad to the stand
2
for iPad.
iPad
Stand for iPad
Connect the iPod, iPhone 3
or iPad to the unit via USB
connector.
USB
Note:
USB terminal does not support VIDEO out.
To insert adaptor for iPod or iPhone
Open the docking station for iPod and 1
iPhone by pulling up.
iPod, iPhone or iPad playback
Press the ON/STAND-BY button to turn the power on.1
Press the USB button on the remote control or FUNCTION button 2
repeatedly on the main unit to select USB function.
Connect iPod, iPhone or iPad to the unit. “USB/iPod” will appear.
3
Track number
Press the
4 (CD/USB ) button to start playback.
Note
:
Stop button ( ) is invalid during iPod, iPhone or iPad playback.
iPod and iPhone connection (Dock only)
Note:
Docking station is not recommended for iPad connection.
Adaptor for iPhone
iPhone (bottom)
Dock connector
iPhone
Dock for iPhone
Connector for iPhone
Insert the adaptor for iPod or iPhone into unit and connect your
2
iPod or iPhone.
Adaptor for iPod and iPhone connection
Notes:
Please use the adaptor supplied with your iPod or iPhone unit.
You can use an audio cable to connect your iPod to the AUDIO IN
jack if:
your iPod adaptor does not fi t into the iPod dock on the main 1.
unit.
you have an iPod that does not have an iPod adaptor.2.
you have an iPod that does not have an iPod 30 pin connector.3.
Adaptor No. iPhone Description Capacity
12
iPhone 4GB & 8GB & 16GB
15
iPhone 3G 8GB & 16GB
15
iPhone 3GS 16GB & 32GB
19
iPhone 4 16GB & 32GB
XL-HF201P_HF301P_US.indd 6XL-HF201P_HF301P_US.indd 6 3/7/2012 10:35:22 AM3/7/2012 10:35:22 AM