Filter
Top Products
04/1/28 XL-DAB10N 20H_001 EN.fm
E-18
9
8
7
6
5
4
3
2
1
9
Listening to the DAB+
Digital Audio Broadcasting is a digital transmission system
where audio signals are converted to digital signals for
broadcasting. DAB+ is broadcast as a group of data called
multiplex (ensemble) which may contain one or more
stations (services). Each station contains a primary
service and there may be one or more secondary services.
This allows several programmes or services to be
transmitted on a single frequency.
When turned on for the first time, the unit scans radio
stations automatically to create a station list. You can make
the AUTOTUNE again when you move the unit to other
areas or add multiplex channels to the station list.
After the scan:
The stations will be stored in alphanumeric order and the
first station on the list will be selected and you will hear it
through the speakers.
● To listen to other stations, see “Selecting a station in
the station list” on page 18.
Notes:
● If no station is found, “NO STN” appears.
● Up to 99 appears for total received stations.
Once a DAB+ station is received, you can select stations
in the station list.
You can manually store stations which AUTOTUNE
cannot find. If reception is poor, you can adjust the
sensitivity. Manual tune is only available after Auto tune.
Perform AUTOTUNE first.
■ About DAB+ (Digital Audio Broadcasting)
■ Auto tune
1
Press the DAB button until “DAB” appears on the
display.
2 Press DAB SCAN button on the remote control for
more than 3 seconds. AUTOTUNE scanning begins.
DAB + SIGNAL
MULTIPLEX
(ENSEMBLE)
SERVICES
SERVICES
COMPONENTS
(STATIONS)
The scanning progress is
indicate by advancing asterisks.
The number of received station
■ Selecting a station in the station list
1
Press the DAB button until “DAB” appears on the
display.
2 Whilst receiving a DAB+ station, press the TUNING/
FOLDER ( or ) to select the desired station.
3 Within 10 seconds, press the DAB ENTER button on
the remote control to tune into the desired station.
■ Manual tune
1
Press the DAB button until “DAB” appears on the
display.
2 Press the DAB SCAN button
once.
3 Within 10 seconds, press the
TUNING/ FOLDER ( or ) to
select the DAB+ frequency.
4 Within 10 seconds, press the DAB
ENTER button.
● Reception sensitivity appears. The percentage
number indicate the current level.
● If the level is too low, move the aerial or unit to
improve reception.
5 Press the DAB ENTER button again to store the
station and exit manual tune.
Display current station
The name of the station
being selected