Filter
Top Products
04/1/28 XL-DAB10N 20H_001 EN.fm
E-10
9
8
7
6
5
4
3
2
1
9
Advanced CD or MP3/WMA disc playback
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected
disc.
● The Direct Search buttons allow you to select up to
number 9.
● When selecting number 10 or higher, use the “10+”
button.
Notes:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
To stop playback:
Press and hold / button on main unit or press CD
button.
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “RPT ONE”
appears. Press the / button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “RPT ALL”
appears. Press the / button.
To repeat all desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page
10 and then press the PLAY MODE button until “RPT ALL”
appears.
To cancel repeat play:
Press the PLAY MODE button again until “ ”
disappears.
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RANDOM” icon light up. Press the /
button.
To cancel random play:
Press and hold the PLAY MODE button. “RANDOM” icon
will disappear.
Notes:
● During random playback, repeat function is not
possible.
● Playback will stop after all the tracks is played
randomly.
● If you press the button during random play, you can
move to the track selected next by the random
operation. On the other hand, the button does not
allow you to move to the previous track. The beginning
of the track being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
You can choose up to 32 selections for playback in the
order you like.
■ Direct track search
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
B. For example, to choose 130
1 Press the “10+” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
■ Repeat play
Selected track number
■ Random play
■ Programmed play
1
Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2 Press the or buttons on the remote control to
select the desired track.
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you make a mistake, press the
MEMORY button repeatedly to select the wrong track
then press the CLEAR button.
5 Press the / button to start playback.
Selected track number