Filter
Top Products
04/1/28 XL-DAB10N 20H_001 EN.fm
E-13
9
8
7
6
5
4
3
2
1
9
Listening to USB mass storage device/MP3 player (continued)
Notes:
● SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
● Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
● This USB memory’s format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
Notes:
● This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, the file will be
automatically skipped. This will take a few seconds. If
abnormal indications appear on the display due to the
unspecified file, turn off the unit and then turn it on
again.
● This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
● The USB port is only intended for direct connection to
a USB memory device without any cable.
Advanced USB playback
Repeat play can play all tracks sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “RPT ONE”
appears. Press the / (USB / ) button.
To repeat one folder:
Press the PLAY MODE button repeatedly until “RPT FLD”
appears. Press the / (USB / ) button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “RPT ALL”
appears. Press the / (USB / ) button.
To cancel repeat play:
Press the PLAY MODE button repeatedly until “NORMAL”
appears and “ ” disappear.
You can choose up to 32 selections for playback in the
order you like.
■ To play back USB/MP3 player with folder
mode on
1
Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the track
information will be displayed.
2 Press the TUNING/FOLDER ( or ) button to select
desired playback folder. To start playback, go to step 4.
To change the playback folder, press the TUNING/
FOLDER ( or ) button to select another folder.
3 Select desired file to be played back by pressing the
or button.
4 Press the / (USB / ) button. Playback will start.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● Display content can be changed by pressing the
DISPLAY button.
■ To remove USB memory device
1
Press the (USB ) button to stop playback.
2 Disconnect USB memory device from the USB terminal.
3 Close the terminal door.
■ Repeat play
■ Programmed play (Folder mode)
1
Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2 Press the TUNING/FOLDER ( or ) to select desired
folder then press the or buttons to select the
desired track.
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed.
5 Press the / (USB / ) button to start playback.
6 During programmed playback, press and hold /
button on main unit or press the CD button to stop
programmed playback. The total number in memory will
appear.
Selected track number