Filter
Top Products
E-7
■ Pairing with other Bluetooth source devices
1 Press the ON/STANDBY button to turn the power on.
2 Press the FUNCTION button (main unit) repeatedly
to select Bluetooth function. “Bluetooth” appears on
the display.
3 Press and hold the PAIRING button for 3 seconds or
more. “Start Pairing” appears on the display. The unit
is now in pairing mode and is ready to be paired with
other Bluetooth source device.
4 Perform pairing procedure on the source device to
detect this unit. “XL-DAB102B SHARP” will appear in
the detected devices list (if available) in the source
device. (Refer the source device operating manual for
details).
Notes:
● Place the devices to be paired within 1 meter (3
feet) of each other when pairing.
● Some source devices are unable to display lists of
detected devices. To pair this unit with the source
device, refer to the source device operating man-
ual for details.
5 Select “XL-DAB102B SHARP” from the source list. If
Passcode* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN
number or Password.
6 “Connected” appears on the display once the unit is
successfully paired with the source device. (Pairing
information is now memorised in the unit.) Some au-
dio source devices may connect with the unit auto-
matically after pairing is completed, otherwise follow
the instructions in the source device operating manual
to start connection.
7 Press the play button on main unit, remote control or
source device to start Bluetooth streaming playback.
Notes:
● If a device such as microwave oven, wireless LAN
card, Bluetooth device or any other device that uses
the same 2.4 GHz frequency is placed near the system
some sound interruption may be heard.
● The transmission distance of the wireless signal be-
tween the device and the main unit is about 10 m (32 ‘),
but may vary depending on your operating environment.
If a steel concrete or metallic wall is between the device
and the main unit, the system may not operate at all,
because the wireless signal cannot penetrate metal.
● If this unit or the source device is turned off before Blue-
tooth connection is completed, pairing will not be com-
pleted and the pairing information will not be memo-
rised. Repeat step 1 onward to start pairing again.
● To pair with other devices, repeat steps 1 - 5 for each
device. This unit can memorize up to a maximum of
99 devices. If subsequent device is paired, the oldest
device paired will be deleted.
● Once a device is ousted or deleted from the pairing list,
the pairing information for the device is also deleted. To
listen to the sound from the device again, it needs to be
re-paired. Perform steps 1 - 5 to pair the device again.
● XL-DAB102BH supports Bluetooth prole AVRCP 1.4.
If your device supports the same prole (refer to device
manufacturer’s specication), XL-DAB102BH is able to
control the volume of the device and display the song
information (title, album, artist).
Note:
Some music applications do not support this feature,
hence there will be no volume synchronisation and no
song information will be displayed even if your Bluetooth
device supports such prole.
■ Listening to the sound
Check that:
● The source device Bluetooth functionality is ON.
● Pairing of this unit and the source device is completed.
● Unit is in connected mode.
1 Press the ON/STANDBY button to turn the power on.
2 Press the FUNCTION button (main unit) repeatedly to
select Bluetooth function.
3 Start the Bluetooth connection from the Bluetooth
stereo audio source device.
4 Press the BLUETOOTH / button.
Note:
If the source device has an extra bass function or
equalizer function, set them to off to avoid sound dis-
tortion.
Note:
Make the Bluetooth connection again if the source device is
not turned on, or its Bluetooth functionality is off or is in sleep
mode.
■ To disconnect the Bluetooth device
Perform any of the followings.
– Disconnect the Bluetooth connection on the audio source
device. Refer the operating manual supplied with the
device.
– Turn off the Bluetooth stereo audio source device.
– Turn off this unit.
Note:
The volume of this unit may not be controlled as intended
depending on the device.
■ Auto power on
During Bluetooth standby mode, the unit will automatically
power on when the Bluetooth connection is set up between
the main unit and your device.
Note:
This function is not applicable during Bluetooth standby
mode off.
Listening to Bluetooth enabled devices (continued)