E-4
EN
■ Aerial connection
Supplied FM/DAB aerial:
Connect to the FM/DAB 75 ohms socket and position it
where reception is best.
External FM/DAB aerial:
Use an external FM/DAB aerial (75 ohms coaxial cable)
for better reception. Disconnect the supplied FM/DAB
aerial wire before use.
Note:
Keep the aerial away from the unit or AC power lead to
avoid noise pickup.
■ Speaker connection
+ speaker terminal red wire
- speaker terminal black wire
● Use speakers with an impedance of 6 ohms or more,
as lower impedance speakers can damage the unit.
● Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
● Do not let the bare speaker
wires touch each other.
● Do not allow any objects to fall
into or to be placed in the bass
reex ducts.
● Do not stand or sit on the
speakers. You may be injured.
Incorrect
■ Bluetooth standby mode
● The rst time the unit is plugged in, it will enter the
Bluetooth standby mode. Bluetooth standby indicator
lights up.
● To cancel the Bluetooth standby mode, press the ECO
button (remote control) during power standby mode.
The unit will enter the low power consumption mode.
● To return to the Bluetooth standby mode, press the
ECO
button again.
■ AC power connection
After all connections have been made correctly, plug the
AC power lead into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
Make sure to unplug the AC power lead before making any connections.
System connections
To select Line In function:
Press FUNCTION button (main unit) or AUDIO/LINE (IN-
PUT) button (remote control) repeatedly until Line in is
displayed.
Notes:
● No sound is heard from the subwoofer without a built-
in amplier.
● Subwoofer Pre-out (audio signal): 200mV / 10k ohms
at 70 Hz.
To TV audio
output socket
FM/DAB
aerial
Left
speaker
TV
Red
To LINE
input socket
Audio cable
(not supplied)
Commercially
available
Subwoofer
(Amplier
Built-In)
Installing the
supplied FM/
DAB aerial
Black
To right
speaker
Wall socket
(AC 100 - 240 V
~ 50/60 Hz)
Audio cable
(not supplied)