Sharp TINS-E595WJQZ Home Theater System User Manual


 
36
Before Starting Playback
Turning the Power On
POWER
BD/DVD/CD mode indicator
AQUOS PURE MODE indicator
STANDBY indicator
Turning the power on
Press POWER on the remote control or on the main
unit to turn on the power of the system.
NOTE
When you turn on this system for the first time after
purchase or when you turn on this system after you
perform “To Reset this System” (see page 83), the
language setting screen will be displayed, so please
perform the language setting (see step 4 of page 37).
Entering standby
Press POWER on the remote control or on the main
unit to enter standby.
If you press POWER again immediately after entering
standby, the system may not turn on. If this happens, wait
for 10 seconds or more and then turn on the power again.
NOTE
When the STANDBY indicator is blinking (may take some
time), the system cannot be turned on.
Indicators on the Main Unit
STANDBY indicator
Red blinks Preparing for standby
Red on Standby
AQUOS PURE MODE indicator
Green on Output in AQUOS PURE
MODE (See page 43.)
BD/DVD/CD mode indicator
Blue on Playing back
Blue blinks Loading a disc