Sharp TINS-E595WJQZ Home Theater System User Manual


 
33
Connection and Setup
Antenna Connection
Connecting to the FM ANT Jack
You can connect an FM antenna to the system to receive FM broadcast.
STEPS
1: Be sure to turn off this system and the equipment before making any connections.
2: Firmly insert the cable all the way into the terminal connector.
Connecting a supplied FM antenna wire
Connect the FM antenna wire to the FM ANT jack and position the FM antenna wire in the direction where the strongest signal
can be received.
Main Unit
FM antenna wire
(supplied)
NOTE
Placing the FM antenna wire on the unit or near the AC power cord may cause noise.
Place the FM antenna wire away from the unit for better reception.
Connecting an external FM antenna
Use an outdoor FM antenna if you require better reception. Consult your dealer.
Main Unit
Outdoor
FM antenna
NOTE
When an outdoor FM antenna is used, disconnect the supplied FM antenna wire.
Refer to “Listening to the FM Broadcast”. (Page 62)
After connecting