Filter
Top Products
E-62
ENGLISH
SD-PX2
References
- Specifications -
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Amplifier
SACD/DVD player
Tune r
Power source AC 120 V, 60 Hz
Power consumption 60 W
Dimensions Width: 14-1/2" (368 mm)
Height: 9-11/16" (245 mm)
Depth: 4-1/2" (114 mm)
Weight 8.2 lbs. (3.7 kg)
Audio output
terminals
Front speakers, Center speaker and Surround speakers:
more than 4 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Subwoofer pre-out: RCA type 1
Optical digital output: Square type 1
Audio output (VCR): RCA type 1 pair (L/R)
Audio input terminals Audio input (TV, VCR): RCA type 2 pairs (L/R)
Coaxial digital input (AUX): RCA type 1
Optical digital input (TV): Square type 1
Monitor output
terminals
Video output: RCA type 1
S-video output: S-terminal 1
Component video output: RCA type 3
Amplification system 5.6448 MHz (128 fs) 1-bit switching (Remarks: fs = 44.1
kHz)
Power output (FTC) 25 watts minimum RMS per channel into 4 ohms from 120
Hz to 20 kHz, 2 % total harmonic distortion
Rated power output Front: 35 W + 35 W, Center: 35 W,
Surround: 35 W + 35 W (4 ohms at 1 kHz)
A/D noise shaping 7th-order (delta - sigma) modulation
Signal system NTSC color
Supported disc types DVD-Video/Audio (Region number 1, ALL), SACD, DVD-
R/RW (video mode), audio CD, CD-R, CD-RW
Video signal Horizontal resolution: 500 lines
S/N ratio: 70 dB
Audio signal Frequency
characteristics
Linear PCM DVD:
4 Hz to 22 kHz
(sampling rate: 48 kHz)
4 Hz to 44 kHz
(sampling rate: 96 kHz)
CD: 4 Hz to 20 kHz
S/N ratio CD: 96 dB (1 kHz)
Dynamic range Linear PCM DVD: 95 dB
CD: 94 dB
Total harmonic
distortion ratio
0.006 % maximum
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz