Filter
Top Products
E-48
ENGLISH
SD-PX2
Advanced Features
- Setting the timer -
1 Turn on the power, set the MODE 1/MODE 2 switch to MODE 2 and
press the TIMER/SLEEP button.
2 Within 10 seconds, press the or button to select "TIMER
ONCE" or "TIMER DAILY", and press the ENTER button.
Once timer Daily timer
3 Within 10 seconds, press the or button to select "ONCE SET"
or "DAILY SET", and press the ENTER button.
Once timer Daily timer
4 Press the or button to adjust
the hour and then press the EN-
TER button.
5 Press the or button to adjust
the minutes and then press the
ENTER button.
6 Set the time to finish as in steps
4 and 5 above.
7 Switch the input with the or button, and then press the ENTER
button.
z Available playback sources: DVD/CD, TUNER, TV, AUX and VCR.
z If you select TV, AUX or VCR, connect the unit to the corresponding equip-
ment and set the timer.
z When you select "TUNER", select a station by pressing the or button, and
then press the ENTER button.
z If a station has not been programmed, "NO P.SET" will be displayed and timer
setting will be canceled.
Preset channel number
8 Adjust the volume with the or
button and press the ENTER
button.
Do not set the volume too high.
9 Press the ON/STAND-BY button to enter the power stand-by mode.
z The unit enters the timer stand-by mode.
(The timer set indicator lights up. See page 49.)
z The timer setting is retained.