Filter
Top Products
E-54
ENGLISH
SD-PX2
Advanced Features
- Mounting the unit on the wall -
Warning:
z Install brackets properly following the operation manual. Improper installation may
cause the main unit to fall leading to injury or breakage.
z To ensure a proper installation, contact your dealer or installer.
z During installation, be careful not to pinch your fingers.
z The wall should be strong enough to support the weight of the main unit. (Install
on a reinforced part.)
z Do not impose an extra load on a wall bracket. It may cause the main unit to fall
leading to injury or breakage.
z Do not modify or change the main unit bracket. It may cause the main unit to fall
leading to injury or breakage.
Caution:
z Do not block the ventilation opening of the main unit with a tablecloth, etc. Heat
may be kept inside causing fire.
z Select a mounting position carefully to avoid injury by hitting head.
z Never step on or hang from the main unit. Pay special attention to children. It may
cause injury or breakage to the main unit.
z Check the wall strength. SHARP is not liable for accidents caused by insuffi-
cient strength of the wall or improper mounting.
z Improper mounting may cause the main unit to fall. If you need assistance,
contact your dealer or installer.