Sharp SD-CX1H CD Player User Manual


 
60
CX1H_UK60-61.fm00/12/18
References
Maintenance / Specifications
Maintenance
Cleaning the CD pickup lens
Do not touch the CD pickup lens. If fingerprints or dust accumulate on the pickup,
clean it gently with a dry cotton swab.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Caution:
Do not use chemically treated cleaning cloths or other chemicals.
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
General
Amplifier
CD player
Pickup (Lens)
Power source AC 230 V, 50 Hz
Power consumption Power on: 42 W
Power stand-by: 0.6 W (*)
Dimensions Width: 330 mm (13")
Height: 208 mm (8-3/16")
Depth: 190 mm (7-1/2")
Weight 5.0 kg (11 lbs.)
( * ) This power consumption value is obtained when the demonstration mode is can-
celled in the power stand-by mode. Refer to page 14 to cancel the demonstration
mode.
Amplification system 64fs 1-bit switching
(Remarks: fs = 44.1 kHz)
Rated output power RMS: 40 W (20 W + 20 W) (DIN 45 324)
A/D noise shaping 7th-order (delta - sigma) modulation
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals Auxiliary: 500 mV/47 kohms
Type 1-disc vertical compact disc player
Signal readout Non-contact, 3-beam semiconductor laser pickup
D/A converter 1-bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Web-site:
www.sharp.co.uk/support
Help Line:
08705 274277 (office hours)