Filter
Top Products
19
CX1H_UK17-25.fm00/12/17
CD Playback
Listening to a CD
To remove the CD:
Whilst in the stop mode, press the CD button.
Press the CD eject button and remove the CD.
After use:
Press the CD button and close the CD cover.
When the unit enters the stand-by mode, the opened CD cover will be closed auto-
matically.
Caution:
Be careful not to jam your fingers with the CD cover when opening and clos-
ing it.
Do not stop or move the CD cover manually. It may cause malfunctions to
the unit.
Keep foreign objects out of the CD compartment.
Subjecting the unit to shock or vibration may cause mistracking.
When the unit is not being used, be sure to close the CD cover. If it is left open, the
lens may be covered with dust and the unit may not function properly.
Playing certain compact discs at a high volume may cause mistracking. In this
case, listen at a lower volume.
If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
If an error message is displayed during CD operation, see "Error Messages" on
page 57.
To locate the beginning of a track
To locate the desired portion
Notes:
Normal playback will resume when the or button is released.
When the end of the last track is reached during fast forward, "END" will appear in
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
CD Eject Button
To move to the beginning of the next track:
Press the button during playback.
You can skip to any track by pressing the button repeatedly until the desired
track number appears.
To restart the track being played:
Press the button during playback.
You can skip to any track by pressing the button repeatedly until the desired
track number appears.
For audible fast forward:
Press and hold down the button during playback.
For audible fast reverse:
Press and hold down the button during playback.
Web-site:
www.sharp.co.uk/support
Help Line:
08705 274277 (office hours)