Filter
Top Products
57
CX1H_UK49-59.fm00/12/17
References
Error Messages
Error Messages
When an error message is displayed, proceed as follows:
Error messages Meaning Remedy
BLANK MD
Nothing is recorded. (Neither
music nor disc name is re-
corded.)
Replace it with another disc.
Can't COPY
You tried to record from a
copy prohibited CD.
Replace the CD.
Can't EDIT
A track cannot be edited. Change the stop position of the
track and then try editing it.
Can't READ*
The disc is damaged. Replace it with another disc.
(*: Number or
symbol)
TOC information cannot be
read.
Erase the disc and try recording
again.
MiniDisc not specified.
Can't REC
Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.
Re-record or replace the Mi-
niDisc.
Can't T REC
Timer recording is impossible
or there is no available space
on the MD.
Replace it with another recorda-
ble disc.
The disc is out of recording
space.
Can't WRITE
The TOC information could
not be created properly due to
a mechanical shock or to
scratches on the disc.
Set this unit to the stand-by
mode and try to write the TOC
again. (Remove any source of
shock or vibration whilst writing.)
CD NO DISC
A CD has not been loaded. Load a CD.
The CD data cannot be read. Reload the CD.
DISC FULL
The disc is out of recording
space.
Replace the disc with another
recordable disc.
EDIT OVER
You chose 21 or more tracks
for track editing.
Decrease the number of tracks.
Er - MD **
A MiniDisc is not working
properly.
Press the MD button.
(**: Number or
symbol)
Set this unit to the stand-by
mode and turn the power on
again.
Error messages Meaning Remedy
MD NO DISC
A MiniDisc has not been load-
ed.
Load a MiniDisc.
The MiniDisc data cannot be
read.
Reload the MiniDisc.
NAME FULL
The number of characters for
the disc name or track name
exceeds 40.
Shorten the disc or track name.
NOT AUDIO
The data recorded on this disc
is not audio data.
Replace the disc.
PLAYBACK MD
You tried to record on a play-
back-only disc.
Replace it with another recorda-
ble disc.
POWER ?
A MiniDisc is not working
properly.
Set this unit to the stand-by
mode and turn the power on
again.
PROTECTED
The disc is write protected. Move the write protection tab
back to its original position.
TEMP OVER
The temperature is too high. Set this unit to the stand-by
mode and wait for a whilst.
TOC FORM **
TOC information recorded on
the MD does not match the
MiniDisc specifications or it
cannot be read.
Replace it with another disc.
(**: Number or
symbol)
Erase the disc and try recording
again.
TOC FULL
There is no space left for re-
cording track numbers.
Replace it with another recorda-
ble disc.
TOC FULL 1
There is no space left for re-
cording character information.
Replace it with another recorda-
ble disc.
Erase the needless characters.
? MD DISC
The data contains an error. Press the MD button.
MiniDisc not specified. Replace it with another disc.
Web-site:
www.sharp.co.uk/support
Help Line:
08705 274277 (office hours)