Filter
Top Products
48
MAINTENANCE
■ Internal care
● Do not touch the Laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
■ External care
● Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
● Do not use chemically treated cleaning cloths or
other chemicals.
■ Care of compact discs
If this product is subjected to strong external inter-
ference (mechanical shock, excessive static elec-
tricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction or
the display may not function correctly. If such a prob-
lem occurs, do the following:
1 Press the ON/STAND-BY button to enter the
stand-by mode.
2 Press the ON/STAND-BY button whilst holding
down the EQUALIZER button and the PLAY
button.
● “ALL CLEAR” will appear.
Caution:
● The operation explained above will erase all data
stored in memory including clock and timer
settings, and tuner, MD and CD presets.
1,2
2
NO
YES
Correct
Compact discs are fairly resistant to damage, how-
ever mistracking can occur due to an accumulation
of dirt on the disc surface.
Follow the guidelines below for maximum enjoy-
ment from your CD collection and player.
● Do not write on either side of the disc, particu-
larly the non-label side.
Signals are read from the non-label side. Do not
mark this surface.
● Keep your discs away from direct sunlight, heat,
and excessive moisture.
● Always hold the CDs by the edges. Fingerprints,
dirt, or water on the CDs can cause noise or
mistracking. If a CD is dirty or does not play prop-
erly, clean it with a soft, dry cloth, wiping straight
out from the centre, along the radius.
RESETTING THE MICROCOMPUTER