Sharp MD-M2H Stereo System User Manual


 
43
Listening to sound from an exter-
nal unit
To listen to sound from an external unit connected
to the analogue input terminals:
Manual recording
You can start a recording manually whilst listening
to playback from other external equipment (Tape
deck, Tuner) connected to the auxiliary input.
1 Press the ON/STAND-BY button to turn the
power on.
2 Press the AUX button.
3 Start playback on the external unit, and adjust
the input sound level using the AUX INPUT
LEVEL control.
When the AUX INPUT LEVEL control is set to
MIN, no sound is obtained.
Adjust the recording level so that the “OVER”
indicator does not light at the maximum level.
L
R
OVER
OVER
4 Adjust the sound level using the VOLUME
buttons on the remote control or the VOLUME
control on this main unit.
4
4
2
1
2
1
MAX
MIN
AUX
INPUT
LEVEL
3
1 Press the ON/STAND-BY button to turn the
power on.
2 Load a recordable MD.
3 Press the AUX button.
4 Press the I REC button.
5 Start playback on the external unit.
6 Adjust the recording level using the AUX INPUT
LEVEL control.
Adjust the recording level so that the “OVER”
indicator does not light at the maximum level.
L
R
OVER
OVER
7 Press the 0 6 button.
To stop recording:
Press the button.
3
2
3
1
7
4
4
7
H
MAX
MIN
AUX
INPUT
LEVEL
6
H
1
(Continued)