Sharp MD-M2H Stereo System User Manual


 
35
To change disc names and track
names
To add a character:
Example: To change “BET” to “BEST”
1 To change disc names, perform steps 1 - 3 on
page 33.
To change track names, perform steps 1 - 2 on
page 34.
2 Press the or button to make the character
at the place you want to add a letter begin flash-
ing.
To cancel the operation, press the button.
3 Select the character you want to add, pressing
the or button. Then, press the ENTER
button.
The selected character will be added, and the
original characters will move to the right by one.
4 After entering all of the characters in the name,
press the NAME/TOC EDIT button.
Note:
You cannot modify disc or track names created
on other equipment if they are over 40 charac-
ters.
In this case, erase the name and then enter a
new name.
Example: To change “BESUT” to “BEST”
1 To change disc names, perform steps 1 - 3 on
page 33.
To change track names, perform steps 1 - 2 on
page 34.
2 Press the or button to make the character
you want to erase begin flashing.
To cancel the operation, press the button.
3 Press the CLEAR button.
After this step, if you are not going to enter a
character, go to step 5.
4 Select the character you want to add, pressing
the or button. Then, press the ENTER
button.
The selected character will be added, and the
original characters will move to the right by one.
5 After entering all of the characters in the name,
press the NAME/TOC EDIT button.
(Continued)
CLEAR
NAME/
TOC EDIT
5 3/
2 4
ENTER
H
/ /
/
(Remote control operation)