Sharp MD-M2H Stereo System User Manual


 
23
(Continued)
6 Whilst the selected programme type is flashing
(within 4 seconds), press the PTY.TI SEARCH
(PTY.TI) button again.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
RECkHz
MHz SLEEP
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
RECkHz
MHz SLEEP
After the name of the selected programme type
has been lit for 2 seconds, "SEARCH" will ap-
pear, and the search operation will start.
Note:
If the display has stopped flashing, start again from
step 4. If the unit could find out a desired programme
type you want, corresponding channel number will
flash for about 3 seconds, and then a station name
will flash for 7 seconds, and then remain lit.
If you want to listen to same programmed type
of another station, press the PTY.TI SEARCH
(PTY.TI) button whilst the channel number or sta-
tion name is flashing. The unit will look for the
next station.
Note:
If no station of the programme type you want can
be found, "NOT FOUND" will appear for 4 sec-
onds.
If you have selected the traffic programme:
If you select traffic programme (TP) as the pro-
gramme type in step 5, to receive only radio sta-
tions which broadcast traffic programmes, the TP
will appear. (However, this does not necessarily
mean that you will hear any traffic announcements
at that time.)
When a traffic announcement is actually being
made, the TA will appear.
(When both the TP and TA will appear, an an-
nouncement is being made.)
2,3
1
1
2,3
4,6
5
5
4,6
To recall stations that have been
stored in memory (PTY search)
You can search a desired stations by specifying the
programme type (news, sports, traffic programme,
etc. ... see page 18-19) from among the stations
that have been stored in memory.
(ASPM is convenient for storing stations in memory.)
1 Press the ON/STAND-BY button to turn the
power on.
2 Press the TUNER (BAND) button.
3 Press the TUNER (BAND) button to select the
FM ST or FM band.
4 Press the PTY.TI SEARCH (PTY.TI) button.
"PTY TI" and "SELECT" will appear alternately
for about 6 seconds.
5 Within 6 seconds, press the PRESET (X or W)
button to select the programme type you want.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
RECkHz
MHz SLEEP
Each time the button is pressed, the programme
type will appear. If the button is held down for
more than 0.5 seconds, the programme type will
appear continuously.