Sharp MD-M2H Stereo System User Manual


 
14
APMS (Automatic Programmable
Music Selector)
1 Select the desired programme source, CD or
MD, by pressing the CD or MD button.
2 Press the MEMORY button.
MEMORY
MEMORY
REC
3 Press the 5 3 or 2 4 button.
TRACK
MEMORY
REC
Selected track number
TRACK
4 Press the ENTER button.
MEMORY
TOTAL
Playback order
TOTAL
5 Repeat steps 3 and 4 for any other tracks up to
20 tracks (P-20) can be programmed.
6 Press the button.
MEMORY
TOTAL
Total playing time
Total number of tracks
MEMORY
7 Press the 0 6 button to start playback of the
programmed selections.
After all of the programmed tracks have finished
playback, the unit will automatically stop.
(Continued)
3
CLEAR
1
2
6
7
4
(Remote control operation)
To clear the programmed selections:
Press the CLEAR button whilst the “MEMORY”
indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
To cancel the APMS:
Whilst the unit is stopped in the APMS mode, press
the CLEAR button to turn off the “MEMORY” dis-
play.
The programme contents will be erased.
When you open the CD compartment or a
MiniDisc is ejected, the APMS mode will be can-
celled.
To check which tracks are programmed:
Whilst the unit is stopped in the APMS mode, press
the 5 3 or 2 4 button.
Playback order
Track number
Adding tracks to the programme
If a programme has been previously stored, the
“MEMORY” indicator will be displayed. Then
follow steps 2 - 6 to add additional tracks, the new
tracks will be stored after the last track of the origi-
nal programme.
Notes:
It is not possible to insert an additional track
between programmed tracks that have already
been entered.
Programming and canceling are not possible
during playback or in the pause mode.