Filter
Top Products
11
■ Battery installation
1
While pushing the locking tab to-
wards the center of the remote con-
trol, slide out the battery holder.
Locking
tab
Back of
remote control
2 Remove the old battery from the
battery holder, insert the new bat-
tery and then slide the battery hold-
er back into the remote control.
Battery type
Battery holder
Locking tab
Polarity (+)
symbol
Positive (+)
side up
Precautions for battery use:
Remove the battery if the sound bar will not be
used for a long period of time. This will prevent
potential damage due to battery leakage.
Caution:
● Do not use rechargeable battery (nickel-
cadmium battery, etc.).
● Danger of explosion if battery is incorrectly
replaced.
● Replace only with the same or equivalent
type.
● Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such
as sunshine, fire or the like.
● Installing the battery incorrectly may cause
the sound bar to malfunction.
Notes concerning use:
● Replace the battery if the operating distance
is reduced or if the operation becomes er
-
ratic. Purchase “CR 2025”, coin lithium
battery.
● Periodically clean the transmitter on the re-
mote control and the sensor on the sound
bar with a soft cloth.
● Exposing the sensor on the sound bar to
strong light may interfere with operation.
Change the lighting or the direction of the
sound bar if this occurs.
● Keep the remote control away from mois-
ture, heat, shock, and vibrations.
■ Test of the remote control
The remote control can be used within the range
shown below:
MUTE
ON/
STAND-BY
MUSICCINEMA NEWS
SURROUND
BYPASS
INPUT
TV
CHVOL
VOL
RRMCGA322AWSA
SOUND MODE
SOUND BAR HOME THEATRE SYSTEM HT-SB32D
Remote sensor
0.2 m - 6 m
Remote control