Filter
Top Products
02/5/27 CD-XP160W(SCA)E1.fm
8
CD-XP160W
Preparation for Use
- System connections -
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and posi-
tion the FM aerial wire in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise
pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
External FM aerial:
Use an external FM aerial if you require better reception. Consult your
dealer.
Note:
When an external FM aerial is used, disconnect the supplied FM aerial
wire.
Speaker connection
Connect the black wire to the minus (-) terminal and the red to the
plus (+) terminal.
Caution:
Notes:
The speaker grilles are not removable.
There is no physical distinction between the right and left speak-
ers.
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
External
FM aerial
75 ohm
coaxial
cable
Use speakers with an impedance of 6 ohms or
more, as lower impedance speakers can damage
the unit.
Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
Do not let the bare speaker wires touch each
other.
Do not allow any objects to fall into or to be placed
in the bass reflex ducts.
Do not stand or sit on the speakers. You may be in-
jured.
Incorrect
Right speaker
Left speaker