Filter
Top Products
02/5/27 CD-XP160W(SCA)E3.fm
29
CD-XP160W
References
- Specifications -
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes
for
product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Amplifier
CD player
Tuner
Cassette deck
Speaker
Power source AC 110/127/220/230 - 240 V, 50/60 Hz
Power
consumption
70 W
Dimensions Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 343 mm (13-1/2")
Weight 6.6 kg (14.5 lbs.)
Output power MPO: 100 W (50 W + 50 W)
(10 % T.H.D.)
RMS: 66 W (33 W + 33 W)
(10 % T.H.D.)
RMS: 55 W (27.5 W + 27.5 W)
(0.9 %
T. H.D. )
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Input terminal Microphone: 1 mV/600 ohms
Type 3-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency range FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
Frequency
response
125 - 8,000 Hz (Normal tape)
Signal/noise ratio 50 dB (TAPE 1, recording/
playback
)
50 dB (TAPE 2,
playback
)
Wow and flutter 0.3 % (WRMS)
Type Twin-drive speaker system
10 cm (4") woofer x 2
Maximum input
power
66 W
Rated input power 33 W
Impedance 6 ohms
Dimensions Width: 200 mm (7-7/8")
Height: 305 mm (12")
Depth: 175 mm (6-9/16")
Weight 2.6 kg (5.7 lbs.)/each