Filter
Top Products
02/5/27 CD-XP160W(SCA)E2..fm
17
CD-XP160W
CD Playback
- Advanced CD playback -
Advanced CD playback (continued)
Programmed play
This may be operated only with the remote control.
You can choose up to 20 selections for playback in the order you
like.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
If you open the disc
tray
, change to another function or enter the
stand-by mode, the programmed sequence is automatically can-
celled.
During programme operation, random play is not possible.
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat, and excessive
moisture.
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
1 Whilst in the stop mode, press
one of the 1 - 3 buttons to
select the desired disc.
2 Press the or button to
select the desired track.
If you select and memorise a track whose number exceeds the
last track number on the disc, it will not be played back.
3 Press the MEMORY button to save the track number.
When the track is memorised, "MEMORY" will appear.
4 Repeat steps 1 - 3 for other tracks. Up to 20 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5 Press the / button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track
will be cleared, beginning with the last track
programmed. When all the tracks are
cleared, "MEMORY" will disappear.
NO YES
Correct
Selected disc number
Selected track number
Playback order