Filter
Top Products
Important safety instructions
3
This symbol is intended to alert the user to the risk of electric shock if the transmitter is
opened. There are no user serviceable parts inside. Refer servicing to qualified personnel only.
This symbol is intended to indicate the presence of important operating and maintenance
instructions in the literature accompanying this transmitter.
Overloading
Do not overload wall outlets and extension cables as this may result in fire and electric shock.
Replacement parts
When replacement parts are required, be sure the service technician uses replacement parts
specified by Sennheiser or those having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety check
Upon completion of any service or repairs to this device, ask the service technician to perform
safety checks to determine that the device is in safe operating order.
Danger of hearing damage due to high volumes
This is a professional transmitter. Commercial use is subject to the rules and regulations of
the trade association responsible. Sennheiser, as the manufacturer, is therefore obliged to
expressly point out possible health risks arising from use.
This transmitter is capable of producing sound pressure exceeding 85 dB(A). 85 dB(A) is the
sound pressure corresponding to the maximum permissible volume which is by law (in some
countries) allowed to affect your hearing for the duration of a working day. It is used as a
basis according to the specifications of industrial medicine. Higher volumes or longer
durations can damage your hearing. At higher volumes, the duration must be shortened in
order to prevent hearing damage. The following are sure signs that you have been subjected
to excessive noise for too long a time:
• You can hear ringing or whistling sounds in your ears.
• You have the impression (even for a short time only) that you can no longer hear high
notes.
Intended use
Intended use of the SR 2000 IEM and SR 2050 IEM transmitters includes:
• having read these instructions, especially the chapter “Important safety instructions” on
page 2,
• using the device within the operating conditions and limitations described in this
instruction manual.
“Improper use” means using the device other than as described in these instructions, or
under operating conditions which differ from those described herein.