Filter
Top Products
Using the operating menu
19
Display Function of the menu item Page
Main menu “Menu”
22
Sensitivity Adjusts the input sensitivity (0 to –42 dB in steps of 3 dB) 22
Mode Selects mono or stereo operation 22
Easy Setup Deactivates the RF signal and activates the Easy Setup Sync
function
30
Frequency Preset Sets the frequency bank and the channel 23
Name Enters a freely selectable name 24
Equalizer Changes the frequency response of the output signal using a
graphic equalizer (+/– 12 dB in steps of 2.4 dB)
24
AutoLock Activates/deactivates the automatic lock mode 25
Advanced Calls up the extended menu “Advanced Menu” 25
Exit Exits the operating menu and returns to the standard display –
Extended menu “Advanced Menu”
25
Tune Sets the transmission frequencies for the frequency banks
“U1” to “U6”
25
Sets the frequency bank, the channel and the transmission
frequency (frequency banks “U1” to “U6”)
26
Sync Settings Adjusts the receiver parameters and activates/deactivates
their transfer to the receivers
27
RF Power Adjusts the transmission power (Low, Standard or High) 28
Warnings Calls up “Warnings” (see below) 28
LCD Contrast Adjusts the contrast of the display panel (adjustable in 16
steps)
28
Reset Resets the settings made in the operating menu 28
IP-Address Adjusts the IP address of the transmitter 29
Software Revision Displays the current software revision 29
Exit Exits the extended menu “Advanced Menu” and returns to the
main menu
–
“Warnings”
Activates/deactivates warnings (color change and warning messages)
AF Peak Audio overmodulation
28
RF Mute RF signal is deactivated
Exit Exits “Warnings” and returns to the extended menu
“Advanced Menu”