Filter
Top Products
15
Adjusting settings via the operating menu
Setting a transmission frequency for the current channel
̈ Set the desired frequency.
Selecting a channel and assigning this channel a frequency
̈
Set the desired channel.
̈ Set the desired frequency.
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the MUTE switch ¾, refer to page 9.
̈ Press the UP button (̆)/DOWN button (̄) until the “Tune”
menu item appears.
̈ Press the SET button.
The frequency selection appears.
̈ Press the SET button.
Your settings are stored.
You are back to the operating menu.
̈ Press the UP button (̆)/DOWN button (̄) until the “Tune”
menu item appears.
̈ Keep the SET button pressed until the frequency bank selec-
tion appears.
̈ Press the SET button.
The frequency selection appears.
Mode Function
“AF On/Off” When the switch is in the MUTE position,
no audio signal is transmitted.
“RF On/Off” When the switch is in the MUTE position,
the RF signal is deactivated.
“Disabled” The muting function is deactivated.
SET
Select the MHz
value and confirm
Select the kHz
value; store the
setting
543 .200 MHz
Tune
548.200 MHz
B.Ch: U. 1 B.Ch: U. 1
Tune
Call up “Tune”
Advanced
Menu
Tune
“Stored”
SET
SET
SET
SET
SET
Select the frequency
bank and confirm
548.200 MHz
B.Ch: U. 1 B.Ch: U. 1
Tune
Call up “Tune”
(special function)
Advanced
Menu
Tune
548.200 MHz
548 .200 MHz
Tune
Select the channel;
store the setting
SET
SET
SET
Call up
“Mute Mode”
Select the desired
setting
Store the setting
Advanced
Menu
Mute Mode
Mute Mode
Mute Mode
RF On/OffAF On/Off
“Stored”
SET
SET
SKP100_529675_0409_Sp9.book Seite 15 Donnerstag, 9. April 2009 1:48 13