Filter
Top Products
10
Using the plug-on transmitter
The current state of the muting function or the RF signal is displayed on
the display panel of the plug-on transmitter:
Selecting a standard display
Audio signal is muted
Transmitter’s display panel: “MUTE” ቨ is displayed
Audio signal is activated (muting is canceled)
Transmitter’s display panel: “MUTE” ቨ is not displayed
RF signal is deactivated
Transmitter’s display panel: Transmission icon ብ is not
displayed, “MUTE” ቨ is displayed
RF signal is activated
Transmitter’s display panel: Transmission icon ብ is displayed,
“MUTE” ቨ is not displayed
You can also deactivate the RF signal on switch-on. For more infor-
mation, refer to the chapter “Switching the plug-on transmitter
on/off” on page 8.
Using the ON/OFF button, you can also activate/deactivate the RF
signal during operation. To do so, briefly press the ON/OFF button
and proceed as described on page 8.
̈ Press the UP button (̆)/DOWN button (̄) to select a
standard display:
Contents of the display Selectable standard display
“Frequency/Name”
“Channel/Frequency”
“Name/Channel”
MHz
533.875
ew100 G3
MUTE
P
AF
ብ
ቨ
ew100 G3
MHz
533.875
MUTE
P
AF
MHz
533.875
B.Ch: 20.12
MUTE
P
AF
B.Ch: 20.12
MUTE
P
AF
ew100 G3
SKP100_529675_0409_Sp9.book Seite 10 Donnerstag, 9. April 2009 1:48 13