Filter
Top Products
14
Adjusting settings via the operating menu
When setting up multi-channel systems, please observe the following:
Only the factory-preset frequencies within one frequency bank are inter-
modulation-free (see page 17). Plug-on transmitter and receiver of a
transmission link have to be set to the same frequency. It is vital to
observe the notes on frequency selection on page 17.
Entering a name – “Name”
Via the “Name” menu, you can enter a freely selectable name (e.g. the
name of the performer) for the plug-on transmitter.
The name can be displayed on the standard displays “Frequency/Name”
and “Name/Channel”. The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Activating/deactivating the automatic lock mode – “Auto Lock”
The lock mode prevents that the plug-on transmitter is accidentally
switched off or programed during operation. The lock mode icon ቦ on
the current standard display indicates that the lock mode is activated.
For information on how to use the lock mode, refer to page 9.
The extended menu “Advanced Menu”
Setting transmission frequencies and the frequency bank “U” –
“Tune”
When you have selected one of the system banks and then select the
“Tune” menu, the plug-on transmitter automatically switches to channel 1
of the frequency bank “U”. In this case, “U.1” briefly appears on the display
panel. Upon delivery, the channels of the frequency bank “U” are not
assigned a transmission frequency.
Via the “Tune” menu item, you can set a transmission frequency to be
stored in the current channel or you can select a different channel in the
frequency bank “U” and assign it a transmission frequency. It is vital to
observe the notes on frequency selection on page 17.
̈ Press the UP button (̆)/DOWN button (̄) to select a
character.
̈ Press the SET button to change to the next segment/
character or to store the complete entry.
̈ Press the UP button (̆)/DOWN button (̄) to select the
desired setting.
When you are in the “Tune” menu item, the RF signal is
deactivated.
Call up “Name” Enter a character
and confirm
Enter a character;
store the entry
Menu
Lichael
Name
Name
Name
Lichael
Michael
“Stored”
SET
SET
SET
SET
Call up “Auto
Lock”
Select the desired
setting
Active
Auto Lock
Active
Auto Lock
Inactive
Auto Lock
Menu
Store the setting
“Stored”
SET
SET
SKP100_529675_0409_Sp9.book Seite 14 Donnerstag, 9. April 2009 1:48 13