Filter
Top Products
9
Using the plug-on transmitter
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto
Lock” menu item (see page 14). If the lock mode is activated, you have
to temporarily deactivate it In order to be able to operate the plug-on
transmitter:
The lock mode icon ቦ flashes prior to the lock mode being activated again.
Muting the audio signal or deactivating the RF signal
The MUTE switch ¾ allows you to mute the audio signal or to deactivate
the RF signal. Via the “Mute Mode” menu item, you can set the desired
function of the MUTE switch ¾ (see page 15).
̈ From the “Mute Mode” menu item, select the desired setting (see
page15).
̈ Exit the operating menu.
̈ Slide the MUTE switch ¾ to the left, to the position MUTE.
The plug-on transmitter reacts as indicated in the table.
̈ Press the ON/OFF button.
“Locked” appears on the display panel.
̈ Press the UP button (̆).
“Unlock?” appears on the display panel.
̈ Press the SET button.
The lock mode is temporarily deactivated.
How you are using the plug-on transmitter determines how
long the lock mode remains deactivated:
Setting Slide the MUTE switch ¾ ... Function
“AF On/Off” ... to the left (position MUTE) Mutes the audio signal
... to the right Unmutes the audio signal
“RF On/Off” ... to the left (position MUTE) Deactivates the RF signal
(offline operation)
... to the right Activates the RF signal
(online operation)
“Disabled” No function
ON/OFF
SET
When you are in the operating menu
The lock mode remains deactivated until you exit the
operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after 10 seconds.
MHz
533.875
ew100 G3
MUTE
P
AF
ቦ
¾
SKP100_529675_0409_Sp9.book Seite 9 Donnerstag, 9. April 2009 1:48 13