Filter
Top Products
4
The SK 500 G3 bodypack transmitter
For an overview of the frequency presets, please refer to the
supplied frequency information sheet. Updated versions of
the frequency information sheet can be downloaded from
the SK 500 G3 product page on our website at
www.sennheiser.com.
The frequency banks “U1” to “U6” allow you to freely select
and store frequencies. It might be that these frequencies
are not intermodulation-free.
Areas of application
The bodypack transmitter can be combined with the
EM 500 G3 rack-mount receiver.
The EM 500 G3 rack-mount receiver is available in the same
UHF frequency ranges and is equipped with the same
frequency bank system with factory-preset frequencies.
This has the advantage that
• a transmission system is ready for immediate use after
switch-on,
• several transmission systems can be operated simulta-
neously on the preset frequencies without causing
intermodulation interference.
Overview of the microphones and instrument cables:
Transmitter Combinable with Receiver
SK 500 G3 •Clip-on
microphones:
ME 2, ME 4,
MKE 2, MKE 40
•Headmics:
ME 3, HSP 2,
HSP 4
•Instrument
cable:
CI 1
EM 500 G3
Microphone/
instrument cable
Microphone
type
Pick-up pattern
ME 2 clip-on
microphone
pre-polarized
condenser
microphone
– omni
ME 4 clip-on
microphone
– cardioid
MKE 2 clip-on
microphone
– omni
ME 3 headmic
– cardioid
MKE 40 clip-on
microphone
– cardioid
HSP 2 headmic
– omni
HSP 4 headmic
– cardioid
CI 1 instrument cable – –
542.625
ew500 G3
B.Ch: 20.30
EQ
+ 12dB
MHz
SKM500
P
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30