Filter
Top Products
13
Using the bodypack transmitter
To switch the bodypack transmitter off:
̈ If necessary, deactivate the lock mode (see page 13).
To switch the bodypack transmitter on and to deactivate
the RF signal on switch-on (offline operation):
To activate the RF signal:
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via
the “Auto Lock” menu item (see page 23).
If the lock mode is activated, you have to temporarily
deactivate it In order to be able to operate the bodypack
transmitter:
̈ Keep the ON/OFF button pressed until “OFF”
appears on the display panel. The red ON LED ¿
goes off and the display panel turns off.
When in the operating menu, pressing the ON/
OFF button will cancel your entry (ESC function) and
return you to the current standard display.
̈ Keep the ON/OFF button pressed until “RF Mute
On?” appears on the display panel.
̈ Press the SET button.
The transmission frequency is displayed but the
bodypack transmitter does not transmit an RF
signal. The transmission icon ብ is not displayed.
When the pilot tone function is activated on both
bodypack transmitter and receiver, “RF Mute”
appears on the receiver’s display panel.
Use this function to save battery power or to
prepare a bodypack transmitter for use during live
operation without causing interference to existing
transmission links.
̈ Briefly press the ON/OFF button.
“RF Mute Off?” appears on the display panel.
̈ Press the SET button.
The transmission icon ብ is displayed again.
̈ Press the SET button.
“Locked” appears on the display panel.
̈ Press the rocker button.
“Unlock?” appears on the display panel.
MHz
542.625
ew500 G3
MUTE
P
AF
ብ