Filter
Top Products
22
Adjusting settings via the operating menu
The following figures are a guide to the best settings:
Selecting the frequency bank and the channel manually –
“Frequency Preset”
Overview of the frequency banks and channels:
Transmission situation Sensitivity setting
Loud music/vocals −30 to −21 dB
Presentations −21 to 0 dB
Instrument input
Electric guitars with
single coil pickups
−30 to −24 dB
Electric guitars with
humbucker pickups
−45 to −30 dB
Guitars with active elec-
tronics (active pickups,
active EQs, piezo pickups)
−45 to −30 dB
When you are in the “Frequency Preset” menu item,
the RF signal is deactivated.
Frequency
bank
Channels Type
“1” to “20” up to 32 per
frequency
bank
System bank:
frequencies are factory-
preset
“U1” to “U6” up to 32 per
frequency
bank
User bank:
frequencies are freely
selectable
When setting up multi-channel systems, please
observe the following:
Only the factory-preset frequencies within one
frequency bank are intermodulation-free (see
page 28).
Bodypack transmitter and receiver of a transmission
link have to be set to the same frequency.
̈ It is vital to observe the notes on frequency
selection on page 28.
Menu
B.Ch:
1. 1
Frequency Preset
B.Ch:
518.200 MHz
Frequency Preset
1. 1
B.Ch:
Frequency Preset
20. 1
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
“Stored”
542.625 MHz
SET SET
SET