Sennheiser SK 500 G3 Satellite Radio User Manual


 
26
Adjusting settings via the operating menu
Emulating guitar cables – “Cable Emulation”
Via the “Cable Emulation” menu item, you can emulate
4 different guitar cable capacities.
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
The bodypack transmitter adds an inaudible signal, known
as the pilot tone, to the transmitted signal. The receiver
detects and evaluates the pilot tone.
The pilot tone supports the receiver’s squelch function
(Squelch) and protects against interference due to
RF signals from other devices.
Devices of the ew 500 G1 series (generation 1) do not
support the pilot tone function. Therefore, please observe
the following when combining a bodypack transmitter or
receiver of the ew 500 G3 series (generation 3) with
devices from an earlier evolution wireless generation:
Transmitter Receiver Make sure to ...
w G3/ w G2 w G3/ w G2 ... activate the pilot
tone function on both
bodypack transmitter
and receiver.
w G3 w G1 ... deactivate the pilot
tone function on the
ew 500 G3 bodypack
transmitter.
w G1 w G3 ... deactivate the pilot
tone function on the
ew 500 G3 receiver.
Select the desired
setting
Store the setting
Cable Emulation
Call up “Cable
Emulation”
Advanced
Menu
Cable Emulation
Medium
Medium
Cable Emulation
High
“Stored”
SET
SET
Call up
“Pilot Tone”
Select the desired
setting
Store the setting
Name
Advanced Menu
Pilot Tone
Active
Active
Pilot Tone
Inactive
Pilot Tone
“Stored”
SET
SET